Limitations of Warranty
JE Engineering as an organisation has existed since 1975. The current senior management have been closely involved with the company for nearly 30 years. Over the decades we have treated warranty issues with ‘common sense’ and worked with customers to find the best solutions we can, on the occasions when faults have developed in cars on which we have worked. In recent years there has been a trend towards an increasingly confrontational and uncooperative atmosphere when occasional problems occur with the cars, so it has become necessary to write this document to clarify the limits of warranty applicable to products and installations from JE Engineering Ltd.
Firstly, any modification made to the standard specification of a car is made because a customer wishes to achieve something different from that which they found to be possible with the standard car. Clearly if the performance of the car is changed, there may well be aspects of the performance of the car which alter in negative ways as well as positive ways, in the opinion of the vehicle user.
Secondly, it is also self-evident that JE Engineering is not an organisation which has the resources to thoroughly test conversions in all possible environments and with all the possible ‘driving styles’ of potential users, so any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Thirdly, although JE Engineering endeavours to ensure the suitability of its products when applied to otherwise standard vehicles, we cannot know whether our products are compatible with other alterations made to the vehicle either before or after the JE Engineering products are fitted. Again, any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Finally, JE Engineering Ltd. does not have a network of dealers around the world, so if we are to carry out any work under a warranty claim, in principle, this work can only be done in our workshop in Coventry, so whether the customer resides in Baginton, Warwickshire, or Manapouri, New Zealand, the problem and cost of returning the product to our workshop rests entirely with the customer.
Terms
JE Engineering will always attempt to be helpful and reasonable in seeking to resolve problems with vehicles, but if the situation is to be dealt with through legal representation, the following will apply as part of the contractual agreement.
1) Any claim for warranty must include the invoice number of the relevant original work carried out by JE Engineering Ltd., and its date.
2) The warranty claim can only be made by the original customer for the product as invoiced. No second owner or other entity is entitled to make any warranty claim.
3) The warranty is absolutely limited to the repair of defects of our materials or workmanship as solely determined by JE Engineering Ltd. No claims will be accepted for consequential losses of any sort, or associated losses of any sort.
4) For warranty work to be carried out, any vehicle or part must be returned to the Siskin Drive, Coventry, workshop of JE Engineering Ltd. in a condition as close as possible to the condition in which it originally left these premises.
5) Where a claim rests essentially in a matter of opinion on the altered performance of the vehicle, JE Engineering Ltd. will listen to this opinion and attempt to optimise the performance of the vehicle as far as possible, as solely determined by us, allowing for the state of the art within JE Engineering Ltd.
6) The warranty will cease to apply (and can never be re-applied) in any way, as soon as the vehicle is used for any extreme purpose. This includes competition use and testing in a competition environment, towing a trailer where the weight exceeds the rated weight for the standard vehicle, use of the vehicle when the loaded weight of the vehicle exceeds the rated weight for the standard vehicle, any type of arduous off-road use where the techniques of driving differ significantly from normal on-road use, use in any sort of extreme environment, and many other potentially challenging circumstances. If a customer is in doubt, JE Engineering Ltd. can offer advice, but it is up to the customer to decide about vehicle use, and it is solely up to JE Engineering Ltd. to determine whether any particular use is beyond the terms of the warranty.
7) Where a part must be replaced, JE Engineering Ltd. can use a new or a reconditioned part at its sole determination.
8) Where any work is carried out and/or parts are replaced under warranty, the newly implemented work and parts take on the remainder of the initial warranty period and mileage, and do not initiate any new warranty timing or mileage.
Implications of the above include :
-
a) We will not accept any liability for defects in parts supplied by the customer or by third parties, whether we fitted the parts or not.
-
b) Where a defect occurs it is the responsibility of the customer to minimise the effects of the defect and possibly suspend use of the vehicle until the defect can be repaired. If this is not done, and this results in a major failure, the warranty only covers the repair of the first defect. The major failure can be repaired by JE Engineering Ltd., at its discretion, but the cost of the repair will have to be met by the customer. For example, if an engine installation develops a water leak or an oil leak, a claim can be made to repair that leak, but if the vehicle continues in use to the point where a lack of water or oil causes a further failure of the engine, the repair of that failure will not be covered by warranty. Similarly, when using an automatic gearbox from JE Engineering Ltd. it may be that under some unique conditions of vehicle loading or towing, ambient temperature, altitude, gradient, road conditions, traffic, etc., that the operation of the gearbox becomes unreliable, e.g. the gearbox allows clutch slip or rather severe gear engagement. A warranty claim can be made to ask us to attempt to improve our calibration of the gearbox control to improve the performance in such conditions, but it cannot include any consequent failure of the gearbox. Consequently, it is always the responsibility of the driver of the vehicle to carefully assess the operation of the vehicle and if necessary, protect from damage by altering driving style, possibly using manual gear operation, and possibly stopping the journey to allow for cooling or other improvements in conditions, or taking other action, so as to prevent damage to the vehicle.
-
c) It is entirely the responsibility of the customer to determine whether the vehicle is suitable for any use to which it is put, considering the specification of the vehicle and any modifications which have been installed by JE Engineering Ltd., the customer, and any other party which has worked on the vehicle. We will attempt to advise, but we are not liable for the eventual performance of the vehicle in whatever unique combination of circumstances the customer instigates. Consequently, it is always the responsibility of the owner and user of the vehicle to carefully assess the operation of the vehicle to understand the effects and combinations of effects of the specifications of the vehicle and the modifications to it. It is advisable to test the vehicle carefully in less arduous conditions and on shorter journeys, initially, to allow the possibility of problems to be shown in more controllable circumstances, rather than trying out the maximum performance of the vehicle in challenging conditions immediately after the work is complete.
-
d) In any situation where a warranty claim is made, even if it is not eventually agreed, the cost of returning the vehicle or any parts to the Coventry premises is entirely the responsibility of the customer. The travelling, moving, or shipping costs are never part of the warranty claim.
-
e) Where it appears to be inconvenient to return the vehicle or parts to our Coventry premises for warranty work, it might be that we can arrange to either send a technician to the vehicle where it is, or to authorise another more convenient workshop to carry out repairs on the vehicle. This is not an obligation on us but might be offered as a helpful solution to a problem. In these circumstances, the travelling and subsistence costs of the visiting technician, and the shipping costs of any parts in either direction, must be met by the customer, and any replaced parts must be returned to us with shipping costs met by the customer. If another workshop is authorised to carry out work on the vehicle, we will only be liable for costs which we have specifically agreed with the workshop, charged at suitable business-to-business rates.
Limitations of Warranty
JE Engineering as an organisation has existed since 1975. The current senior management have been closely involved with the company for nearly 30 years. Over the decades we have treated warranty issues with ‘common sense’ and worked with customers to find the best solutions we can, on the occasions when faults have developed in cars on which we have worked. In recent years there has been a trend towards an increasingly confrontational and uncooperative atmosphere when occasional problems occur with the cars, so it has become necessary to write this document to clarify the limits of warranty applicable to products and installations from JE Engineering Ltd.
Firstly, any modification made to the standard specification of a car is made because a customer wishes to achieve something different from that which they found to be possible with the standard car. Clearly if the performance of the car is changed, there may well be aspects of the performance of the car which alter in negative ways as well as positive ways, in the opinion of the vehicle user.
Secondly, it is also self-evident that JE Engineering is not an organisation which has the resources to thoroughly test conversions in all possible environments and with all the possible ‘driving styles’ of potential users, so any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Thirdly, although JE Engineering endeavours to ensure the suitability of its products when applied to otherwise standard vehicles, we cannot know whether our products are compatible with other alterations made to the vehicle either before or after the JE Engineering products are fitted. Again, any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Finally, JE Engineering Ltd. does not have a network of dealers around the world, so if we are to carry out any work under a warranty claim, in principle, this work can only be done in our workshop in Coventry, so whether the customer resides in Baginton, Warwickshire, or Manapouri, New Zealand, the problem and cost of returning the product to our workshop rests entirely with the customer.
Terms
JE Engineering will always attempt to be helpful and reasonable in seeking to resolve problems with vehicles, but if the situation is to be dealt with through legal representation, the following will apply as part of the contractual agreement.
1) Any claim for warranty must include the invoice number of the relevant original work carried out by JE Engineering Ltd., and its date.
2) The warranty claim can only be made by the original customer for the product as invoiced. No second owner or other entity is entitled to make any warranty claim.
3) The warranty is absolutely limited to the repair of defects of our materials or workmanship as solely determined by JE Engineering Ltd. No claims will be accepted for consequential losses of any sort, or associated losses of any sort.
4) For warranty work to be carried out, any vehicle or part must be returned to the Siskin Drive, Coventry, workshop of JE Engineering Ltd. in a condition as close as possible to the condition in which it originally left these premises.
5) Where a claim rests essentially in a matter of opinion on the altered performance of the vehicle, JE Engineering Ltd. will listen to this opinion and attempt to optimise the performance of the vehicle as far as possible, as solely determined by us, allowing for the state of the art within JE Engineering Ltd.
6) The warranty will cease to apply (and can never be re-applied) in any way, as soon as the vehicle is used for any extreme purpose. This includes competition use and testing in a competition environment, towing a trailer where the weight exceeds the rated weight for the standard vehicle, use of the vehicle when the loaded weight of the vehicle exceeds the rated weight for the standard vehicle, any type of arduous off-road use where the techniques of driving differ significantly from normal on-road use, use in any sort of extreme environment, and many other potentially challenging circumstances. If a customer is in doubt, JE Engineering Ltd. can offer advice, but it is up to the customer to decide about vehicle use, and it is solely up to JE Engineering Ltd. to determine whether any particular use is beyond the terms of the warranty.
7) Where a part must be replaced, JE Engineering Ltd. can use a new or a reconditioned part at its sole determination.
8) Where any work is carried out and/or parts are replaced under warranty, the newly implemented work and parts take on the remainder of the initial warranty period and mileage, and do not initiate any new warranty timing or mileage.
Implications of the above include :
-
a) We will not accept any liability for defects in parts supplied by the customer or by third parties, whether we fitted the parts or not.
-
b) Where a defect occurs it is the responsibility of the customer to minimise the effects of the defect and possibly suspend use of the vehicle until the defect can be repaired. If this is not done, and this results in a major failure, the warranty only covers the repair of the first defect. The major failure can be repaired by JE Engineering Ltd., at its discretion, but the cost of the repair will have to be met by the customer. For example, if an engine installation develops a water leak or an oil leak, a claim can be made to repair that leak, but if the vehicle continues in use to the point where a lack of water or oil causes a further failure of the engine, the repair of that failure will not be covered by warranty. Similarly, when using an automatic gearbox from JE Engineering Ltd. it may be that under some unique conditions of vehicle loading or towing, ambient temperature, altitude, gradient, road conditions, traffic, etc., that the operation of the gearbox becomes unreliable, e.g. the gearbox allows clutch slip or rather severe gear engagement. A warranty claim can be made to ask us to attempt to improve our calibration of the gearbox control to improve the performance in such conditions, but it cannot include any consequent failure of the gearbox. Consequently, it is always the responsibility of the driver of the vehicle to carefully assess the operation of the vehicle and if necessary, protect from damage by altering driving style, possibly using manual gear operation, and possibly stopping the journey to allow for cooling or other improvements in conditions, or taking other action, so as to prevent damage to the vehicle.
-
c) It is entirely the responsibility of the customer to determine whether the vehicle is suitable for any use to which it is put, considering the specification of the vehicle and any modifications which have been installed by JE Engineering Ltd., the customer, and any other party which has worked on the vehicle. We will attempt to advise, but we are not liable for the eventual performance of the vehicle in whatever unique combination of circumstances the customer instigates. Consequently, it is always the responsibility of the owner and user of the vehicle to carefully assess the operation of the vehicle to understand the effects and combinations of effects of the specifications of the vehicle and the modifications to it. It is advisable to test the vehicle carefully in less arduous conditions and on shorter journeys, initially, to allow the possibility of problems to be shown in more controllable circumstances, rather than trying out the maximum performance of the vehicle in challenging conditions immediately after the work is complete.
-
d) In any situation where a warranty claim is made, even if it is not eventually agreed, the cost of returning the vehicle or any parts to the Coventry premises is entirely the responsibility of the customer. The travelling, moving, or shipping costs are never part of the warranty claim.
-
e) Where it appears to be inconvenient to return the vehicle or parts to our Coventry premises for warranty work, it might be that we can arrange to either send a technician to the vehicle where it is, or to authorise another more convenient workshop to carry out repairs on the vehicle. This is not an obligation on us but might be offered as a helpful solution to a problem. In these circumstances, the travelling and subsistence costs of the visiting technician, and the shipping costs of any parts in either direction, must be met by the customer, and any replaced parts must be returned to us with shipping costs met by the customer. If another workshop is authorised to carry out work on the vehicle, we will only be liable for costs which we have specifically agreed with the workshop, charged at suitable business-to-business rates.
02476 305 018
Profile
About
Sarms turkey, crazy bulk bodybuilding
Sarms turkey, crazy bulk bodybuilding - Buy anabolic steroids online
Sarms turkey
Where can i get steroids pills, where can i buy steroids in turkey posted an update 5-14-13 at 11:22 PM You can get their most common formulation, hydrochloric acid tablets, at any pharmacy that sells prescription medications, such as: Dr. Phil , Walgreens , CVS, WalMart, Target etc (some pharmacies only sell one or two types.) If you are in this situation, try to avoid purchasing any kind of steroids through the mail, as this is the only way the manufacturer, which is a drug company not a legitimate pharmacy, will honor the coupon. There is a good chance that this will not affect your prescription or the amount of medicine you need, sarms turkey. Even better for the pharmacist, this would be a great opportunity to try a new product, and show the pharmacist that you are serious about getting what you need - that you are not just looking to buy cheaper over the counter medicines or "just another steroid." Posted by: Anonymous on May 14, 2013 11:50 AM i'm in the same situation , turkey sarms. i know that i may have to buy the drug online , but in my case the pharmacy said they only sold 1 month supply of their brand called hydrochloric acid , they will also send you a 30 day supply after first seeing you , turkey sarms. i hope that is ok for you , turkey sarms. but do note they do sell hydrochloric acid , so i would think it would be ok to order it through the mail , turkey sarms. i wish i knew how to get my money back , turkey sarms. thanks for the advice , your advice are much appreciated, turkey sarms. Posted by: Anonymous on May 15, 2013 04:37 PM thanks for the information , i'm a novice , have used many steroids, all the steroids i've taken have been off brand ones . i was looking at buying , but the same is with your advice. i was going to order via the mail because i know how hard that is , but i got a hold of a friend here to help me . he just so happened to have an old box , and he can take care of it for me , you see its not too big to put on your shelf . all you need is a box .. or the box of pills .. to put in the box . the last thing he needs to do is look for the box you used for your steroids . Posted by: Anonymous on May 15, 2013 05:33 PM Thanks - it's really helped me, stanozolol nedir. I'll get a hold of someone who can get the boxes online.
Crazy bulk bodybuilding
Read the Crazy Bulk reviews , this will take you to the bodybuilding using Crazy Bulk stack for bulking and strengthgaining. Crazy Bulk 1, crazy bulk phone number.0-1, crazy bulk phone number.3g, crazy bulk phone number. The 1.3g is the new release. The 1, crazy bulk phone number.3g is used for a lot of athletes including athletes who are looking for a pump or for bodybuilding or strength/hypertrophy gains, crazy bulk phone number. That includes endurance athletes, football players, wrestlers, etc, crazy bulk phone number. For sports that require a fast recovery from workouts and a lot of endurance work this is your dose. The more I use this product the less likely am I to come down with any of my favorite viruses or viruses such as the flu or the common cold. The 1, crazy bulk phone number.3g is for that person who wants a little bit of protein with every meal but not overload and the rest of your diet, crazy bulk phone number. For a lot of people it makes a decent bulk, crazy bulk instagram. I use 1.1g and it makes for a nice bulking pack and takes up less space. It is easier to swallow and doesn't cause me any problems in terms of stomach upset, crazy bulk review. Crazy Bulk 2.0-2.3g. This is for those for whom you just want a pump or body composition gain, crazy bulk bodybuilding. This dosage is used up to a 1-1.1 gram and 2.3g is used for body builders/body builders looking for a nice pump or a good amount of muscle in the body but not that much muscle. I only use this for people that have a tendency to gain muscle faster than protein needs can be met. At this dosage the majority of your protein will be used by the muscle, crazy bulk for. So if you are not gaining body muscle that means you either are not getting enough nutrients or that your diet is not providing the right nutrients. Crazy Bulk 3, crazy bulk phone number.0-3, crazy bulk phone number.2g, crazy bulk phone number. This is the final dosage and the one used when I am on a diet or training to lose body fat. I never use to high doses of this product. I don't use this product for super long and I only use the 3, crazy bulk bodybuilding.2g, crazy bulk bodybuilding. Crazy Bulk 4.0-4.2g. This is a dosage dose used exclusively for when I am on a diet to lose body fat, crazy bulk phone number0. If I ever use this product when I am on a diet it is for a high dose. This is used up to a 1.4 gram or 4.2g. At the 4, crazy bulk phone number1.2g you are getting 1/4 the dose as the 3, crazy bulk phone number1.2 and using less protein, crazy bulk phone number1.
Many tend to assume all anabolic steroids should yield a set of specific effects at a specific rate of power, but reality tells us varying steroids carry varying results and purposes. Some compounds can increase the size of a muscle cell, while others increase the rate of ATP production, which will change the way a muscle can work effectively to perform its job at full capacity. Another consideration is the dosage needed to elicit muscle growth, as opposed to maximum size, which usually requires an oral dosage of around 1-3 tablets per day. The effects of other aldosterone compounds, or "mixed aldoteroids" can come in the form of muscle building or reducing, depending on the specific compound. When assessing a drug's effectiveness for both muscle growth and muscle maintenance, you want to take into consideration as many parameters as possible, including the number of cycles the test is done under, the type of drug used, the type and amount of aldosterone found in the drug, and any other factors the drug may present. Testosterone and its various forms, as well as any other form and compounds used to increase the testosterone levels can come into play when testing to help determine how far above or below average a user may be. For instance, one can imagine how many cycles or doses of a test can measure a user's testosterone levels, and what they can say about a user's true potential. In fact, many more than six months of in-depth in-vitro testosterone testing will reveal many variables, even when dealing with low dosages of a common steroid. When measuring any steroid for in-vivo testing, test manufacturers must make every aspect of a test specific to a specific drug, and include this information in the instructions for use. For instance, it's common for testosterone to be detected in the urine and other body fluids by various tests, but the test for human growth hormone can only detect growth hormone when given at low dosages. There is even a form of test that can even diagnose breast cancer, but testing for estrogen can only be conducted if the individual has an individualized plan to treat the problem. Of course, not all aldosterone tests are created equal. One common factor between all aldosterone tests is how much, or how little, is actually in the blood. Testosterone can be detected to varying degrees when taking an in-vivo test. Also important is the amount of time and the amount of exposure it is going to carry over from one test to another. It's impossible to say how strong an individual will be, even with careful planning, when testing for aldosterone. Testosterone, for instance, is measured in View sarms mitra's profile on linkedin, the world's largest professional community. Sarms has 5 jobs listed on their profile. See the complete profile on. Sarms лишены всех этих побочных эффектов, что и делает их максимально безопасными и при этом не менее эффективными. Что такое sarm | сарм ? лигандрол, ligandrol. 火雞 a roast turkey is a feature. "sarm is pleased to see continued funding and uptake of the targeted sector support initiative," sarm president ray orb said. И билеты из шарм-эль-шейха в лучшей авиакомпании европы. Перелеты, отели, отдых, аренда машин в шарм-эль-шейхе и других городах мира от turkish airlines. Aleksandra popov aleksandrov serbia. Generation and intial characterization of a sarm epitope‐tagged mouse. Translation for 'sarm' in the free spanish-english dictionary and many other english translations. Exporter of sarms & peptides - andacudarne 10mg capsules, anamuporis 10mg, cardacudarine 10mg offered by mediseller ( a unit of medicare), new delhi, delhi Crazy bulk hgh x2 bodybuilding pill has great functioning as it provides amazing results without putting any pressure on your liver or kidney. Crazy bulk offers 100% reliable products that are part of the ultimate in bodybuilding and are positioned as a real alternative to the usual anabolic steroids. Колористка форум - профиль участника > профиль страница. Пользователь: crazy bulk bulking stack before and after, crazy bulk reviews bodybuilding,. Read the crazy bulk reviews , this will take you to the bodybuilding using crazy bulk stack for bulking and strength. Just click the image for the full review. Crazy bulk has become a buzzword in the bodybuilding community. Numerous fitness enthusiasts and gym-lovers will swear to its incredible. Intymag forum - profil du membre > profil page. Utilisateur: crazy bulk track my order, crazy bulk d\'bal bodybuilding, titre: new member, about: crazy bulk. His friend advised him to use natural steroids by crazybulk that not only. องค์การบริหารส่วนตำบลเขาโร ฟอรัม - โปรไฟล์สมาชิก > ข้อมูลส่วนตัว หน้า. ผู้ใช้: crazy bulk bodybuilding. Com, best bodybuilding cutting cycle, ตำแหน่ง: new Related Article:
https://www.fullyliving.net/profile/marlinedoro164062/profile
https://www.likefamilywecare.com/profile/concettachubb130975/profile
https://www.gpfinc.com/profile/granvillelaundry69514/profile
https://www.yalilefajer.com/profile/loreleirhoten73897/profile