Limitations of Warranty
JE Engineering as an organisation has existed since 1975. The current senior management have been closely involved with the company for nearly 30 years. Over the decades we have treated warranty issues with ‘common sense’ and worked with customers to find the best solutions we can, on the occasions when faults have developed in cars on which we have worked. In recent years there has been a trend towards an increasingly confrontational and uncooperative atmosphere when occasional problems occur with the cars, so it has become necessary to write this document to clarify the limits of warranty applicable to products and installations from JE Engineering Ltd.
Firstly, any modification made to the standard specification of a car is made because a customer wishes to achieve something different from that which they found to be possible with the standard car. Clearly if the performance of the car is changed, there may well be aspects of the performance of the car which alter in negative ways as well as positive ways, in the opinion of the vehicle user.
Secondly, it is also self-evident that JE Engineering is not an organisation which has the resources to thoroughly test conversions in all possible environments and with all the possible ‘driving styles’ of potential users, so any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Thirdly, although JE Engineering endeavours to ensure the suitability of its products when applied to otherwise standard vehicles, we cannot know whether our products are compatible with other alterations made to the vehicle either before or after the JE Engineering products are fitted. Again, any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Finally, JE Engineering Ltd. does not have a network of dealers around the world, so if we are to carry out any work under a warranty claim, in principle, this work can only be done in our workshop in Coventry, so whether the customer resides in Baginton, Warwickshire, or Manapouri, New Zealand, the problem and cost of returning the product to our workshop rests entirely with the customer.
Terms
JE Engineering will always attempt to be helpful and reasonable in seeking to resolve problems with vehicles, but if the situation is to be dealt with through legal representation, the following will apply as part of the contractual agreement.
1) Any claim for warranty must include the invoice number of the relevant original work carried out by JE Engineering Ltd., and its date.
2) The warranty claim can only be made by the original customer for the product as invoiced. No second owner or other entity is entitled to make any warranty claim.
3) The warranty is absolutely limited to the repair of defects of our materials or workmanship as solely determined by JE Engineering Ltd. No claims will be accepted for consequential losses of any sort, or associated losses of any sort.
4) For warranty work to be carried out, any vehicle or part must be returned to the Siskin Drive, Coventry, workshop of JE Engineering Ltd. in a condition as close as possible to the condition in which it originally left these premises.
5) Where a claim rests essentially in a matter of opinion on the altered performance of the vehicle, JE Engineering Ltd. will listen to this opinion and attempt to optimise the performance of the vehicle as far as possible, as solely determined by us, allowing for the state of the art within JE Engineering Ltd.
6) The warranty will cease to apply (and can never be re-applied) in any way, as soon as the vehicle is used for any extreme purpose. This includes competition use and testing in a competition environment, towing a trailer where the weight exceeds the rated weight for the standard vehicle, use of the vehicle when the loaded weight of the vehicle exceeds the rated weight for the standard vehicle, any type of arduous off-road use where the techniques of driving differ significantly from normal on-road use, use in any sort of extreme environment, and many other potentially challenging circumstances. If a customer is in doubt, JE Engineering Ltd. can offer advice, but it is up to the customer to decide about vehicle use, and it is solely up to JE Engineering Ltd. to determine whether any particular use is beyond the terms of the warranty.
7) Where a part must be replaced, JE Engineering Ltd. can use a new or a reconditioned part at its sole determination.
8) Where any work is carried out and/or parts are replaced under warranty, the newly implemented work and parts take on the remainder of the initial warranty period and mileage, and do not initiate any new warranty timing or mileage.
Implications of the above include :
-
a) We will not accept any liability for defects in parts supplied by the customer or by third parties, whether we fitted the parts or not.
-
b) Where a defect occurs it is the responsibility of the customer to minimise the effects of the defect and possibly suspend use of the vehicle until the defect can be repaired. If this is not done, and this results in a major failure, the warranty only covers the repair of the first defect. The major failure can be repaired by JE Engineering Ltd., at its discretion, but the cost of the repair will have to be met by the customer. For example, if an engine installation develops a water leak or an oil leak, a claim can be made to repair that leak, but if the vehicle continues in use to the point where a lack of water or oil causes a further failure of the engine, the repair of that failure will not be covered by warranty. Similarly, when using an automatic gearbox from JE Engineering Ltd. it may be that under some unique conditions of vehicle loading or towing, ambient temperature, altitude, gradient, road conditions, traffic, etc., that the operation of the gearbox becomes unreliable, e.g. the gearbox allows clutch slip or rather severe gear engagement. A warranty claim can be made to ask us to attempt to improve our calibration of the gearbox control to improve the performance in such conditions, but it cannot include any consequent failure of the gearbox. Consequently, it is always the responsibility of the driver of the vehicle to carefully assess the operation of the vehicle and if necessary, protect from damage by altering driving style, possibly using manual gear operation, and possibly stopping the journey to allow for cooling or other improvements in conditions, or taking other action, so as to prevent damage to the vehicle.
-
c) It is entirely the responsibility of the customer to determine whether the vehicle is suitable for any use to which it is put, considering the specification of the vehicle and any modifications which have been installed by JE Engineering Ltd., the customer, and any other party which has worked on the vehicle. We will attempt to advise, but we are not liable for the eventual performance of the vehicle in whatever unique combination of circumstances the customer instigates. Consequently, it is always the responsibility of the owner and user of the vehicle to carefully assess the operation of the vehicle to understand the effects and combinations of effects of the specifications of the vehicle and the modifications to it. It is advisable to test the vehicle carefully in less arduous conditions and on shorter journeys, initially, to allow the possibility of problems to be shown in more controllable circumstances, rather than trying out the maximum performance of the vehicle in challenging conditions immediately after the work is complete.
-
d) In any situation where a warranty claim is made, even if it is not eventually agreed, the cost of returning the vehicle or any parts to the Coventry premises is entirely the responsibility of the customer. The travelling, moving, or shipping costs are never part of the warranty claim.
-
e) Where it appears to be inconvenient to return the vehicle or parts to our Coventry premises for warranty work, it might be that we can arrange to either send a technician to the vehicle where it is, or to authorise another more convenient workshop to carry out repairs on the vehicle. This is not an obligation on us but might be offered as a helpful solution to a problem. In these circumstances, the travelling and subsistence costs of the visiting technician, and the shipping costs of any parts in either direction, must be met by the customer, and any replaced parts must be returned to us with shipping costs met by the customer. If another workshop is authorised to carry out work on the vehicle, we will only be liable for costs which we have specifically agreed with the workshop, charged at suitable business-to-business rates.
Limitations of Warranty
JE Engineering as an organisation has existed since 1975. The current senior management have been closely involved with the company for nearly 30 years. Over the decades we have treated warranty issues with ‘common sense’ and worked with customers to find the best solutions we can, on the occasions when faults have developed in cars on which we have worked. In recent years there has been a trend towards an increasingly confrontational and uncooperative atmosphere when occasional problems occur with the cars, so it has become necessary to write this document to clarify the limits of warranty applicable to products and installations from JE Engineering Ltd.
Firstly, any modification made to the standard specification of a car is made because a customer wishes to achieve something different from that which they found to be possible with the standard car. Clearly if the performance of the car is changed, there may well be aspects of the performance of the car which alter in negative ways as well as positive ways, in the opinion of the vehicle user.
Secondly, it is also self-evident that JE Engineering is not an organisation which has the resources to thoroughly test conversions in all possible environments and with all the possible ‘driving styles’ of potential users, so any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Thirdly, although JE Engineering endeavours to ensure the suitability of its products when applied to otherwise standard vehicles, we cannot know whether our products are compatible with other alterations made to the vehicle either before or after the JE Engineering products are fitted. Again, any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Finally, JE Engineering Ltd. does not have a network of dealers around the world, so if we are to carry out any work under a warranty claim, in principle, this work can only be done in our workshop in Coventry, so whether the customer resides in Baginton, Warwickshire, or Manapouri, New Zealand, the problem and cost of returning the product to our workshop rests entirely with the customer.
Terms
JE Engineering will always attempt to be helpful and reasonable in seeking to resolve problems with vehicles, but if the situation is to be dealt with through legal representation, the following will apply as part of the contractual agreement.
1) Any claim for warranty must include the invoice number of the relevant original work carried out by JE Engineering Ltd., and its date.
2) The warranty claim can only be made by the original customer for the product as invoiced. No second owner or other entity is entitled to make any warranty claim.
3) The warranty is absolutely limited to the repair of defects of our materials or workmanship as solely determined by JE Engineering Ltd. No claims will be accepted for consequential losses of any sort, or associated losses of any sort.
4) For warranty work to be carried out, any vehicle or part must be returned to the Siskin Drive, Coventry, workshop of JE Engineering Ltd. in a condition as close as possible to the condition in which it originally left these premises.
5) Where a claim rests essentially in a matter of opinion on the altered performance of the vehicle, JE Engineering Ltd. will listen to this opinion and attempt to optimise the performance of the vehicle as far as possible, as solely determined by us, allowing for the state of the art within JE Engineering Ltd.
6) The warranty will cease to apply (and can never be re-applied) in any way, as soon as the vehicle is used for any extreme purpose. This includes competition use and testing in a competition environment, towing a trailer where the weight exceeds the rated weight for the standard vehicle, use of the vehicle when the loaded weight of the vehicle exceeds the rated weight for the standard vehicle, any type of arduous off-road use where the techniques of driving differ significantly from normal on-road use, use in any sort of extreme environment, and many other potentially challenging circumstances. If a customer is in doubt, JE Engineering Ltd. can offer advice, but it is up to the customer to decide about vehicle use, and it is solely up to JE Engineering Ltd. to determine whether any particular use is beyond the terms of the warranty.
7) Where a part must be replaced, JE Engineering Ltd. can use a new or a reconditioned part at its sole determination.
8) Where any work is carried out and/or parts are replaced under warranty, the newly implemented work and parts take on the remainder of the initial warranty period and mileage, and do not initiate any new warranty timing or mileage.
Implications of the above include :
-
a) We will not accept any liability for defects in parts supplied by the customer or by third parties, whether we fitted the parts or not.
-
b) Where a defect occurs it is the responsibility of the customer to minimise the effects of the defect and possibly suspend use of the vehicle until the defect can be repaired. If this is not done, and this results in a major failure, the warranty only covers the repair of the first defect. The major failure can be repaired by JE Engineering Ltd., at its discretion, but the cost of the repair will have to be met by the customer. For example, if an engine installation develops a water leak or an oil leak, a claim can be made to repair that leak, but if the vehicle continues in use to the point where a lack of water or oil causes a further failure of the engine, the repair of that failure will not be covered by warranty. Similarly, when using an automatic gearbox from JE Engineering Ltd. it may be that under some unique conditions of vehicle loading or towing, ambient temperature, altitude, gradient, road conditions, traffic, etc., that the operation of the gearbox becomes unreliable, e.g. the gearbox allows clutch slip or rather severe gear engagement. A warranty claim can be made to ask us to attempt to improve our calibration of the gearbox control to improve the performance in such conditions, but it cannot include any consequent failure of the gearbox. Consequently, it is always the responsibility of the driver of the vehicle to carefully assess the operation of the vehicle and if necessary, protect from damage by altering driving style, possibly using manual gear operation, and possibly stopping the journey to allow for cooling or other improvements in conditions, or taking other action, so as to prevent damage to the vehicle.
-
c) It is entirely the responsibility of the customer to determine whether the vehicle is suitable for any use to which it is put, considering the specification of the vehicle and any modifications which have been installed by JE Engineering Ltd., the customer, and any other party which has worked on the vehicle. We will attempt to advise, but we are not liable for the eventual performance of the vehicle in whatever unique combination of circumstances the customer instigates. Consequently, it is always the responsibility of the owner and user of the vehicle to carefully assess the operation of the vehicle to understand the effects and combinations of effects of the specifications of the vehicle and the modifications to it. It is advisable to test the vehicle carefully in less arduous conditions and on shorter journeys, initially, to allow the possibility of problems to be shown in more controllable circumstances, rather than trying out the maximum performance of the vehicle in challenging conditions immediately after the work is complete.
-
d) In any situation where a warranty claim is made, even if it is not eventually agreed, the cost of returning the vehicle or any parts to the Coventry premises is entirely the responsibility of the customer. The travelling, moving, or shipping costs are never part of the warranty claim.
-
e) Where it appears to be inconvenient to return the vehicle or parts to our Coventry premises for warranty work, it might be that we can arrange to either send a technician to the vehicle where it is, or to authorise another more convenient workshop to carry out repairs on the vehicle. This is not an obligation on us but might be offered as a helpful solution to a problem. In these circumstances, the travelling and subsistence costs of the visiting technician, and the shipping costs of any parts in either direction, must be met by the customer, and any replaced parts must be returned to us with shipping costs met by the customer. If another workshop is authorised to carry out work on the vehicle, we will only be liable for costs which we have specifically agreed with the workshop, charged at suitable business-to-business rates.
02476 305 018
Profile
About
Peptide therapy for weight loss near me, peptide for weight loss
Peptide therapy for weight loss near me, peptide for weight loss - Buy anabolic steroids online
Peptide therapy for weight loss near me
While valid testosterone replacement therapy may promote weight loss in obese men, anabolic steroid misuse is not a recommended weight loss strategybecause of its potential side effects. In an effort to assess the impact of testosterone replacement therapy on body weight in overweight and obese men, this study used a modified design to assess the relationship between testosterone replacement therapy and changes in body weight in a cross-sectional population of men. The results demonstrate that the impact of testosterone replacement therapy on body weight is small and no longer significant after 10 years of follow up, side effects of stopping steroids abruptly. Introduction Testosterone is an anabolic steroid with anabolic steroid-like activity. There is growing evidence that high testosterone levels are associated with metabolic syndrome and a higher prevalence of obesity in middle-aged men. Obese men tend to have lower body weights than lean men (3), peptides for cutting reddit. Although high testosterone levels are associated with enhanced muscle mass (4), the relationship between testosterone levels and body weight in men is less clear. For this reason, the association between testosterone levels and body weight is often confounded by other medical and behavioral factors that influence body weight (5–8), steroid tablets for cutting. Testosterone replacement therapy is considered to help men lose body weight, but its impact on body weight remains unclear. Many studies have found that testosterone replacement therapy can promote weight loss in both obese and pre-obese men (9–12) but little is known about its impact on body weight in underweight men, peptide therapy for weight loss near me. Because the number and rate of treatment decisions made by the health care professionals involved in weight management are important in any weight loss program, we conducted a systematic review on the impact of testosterone replacement therapy on body weight. METHODS Study selection Two independent groups of men, consisting of 431 men and 591 men, were prospectively enrolled between 2002 and 2006 in a prospective randomised trial of treatment for metabolic syndrome (MeSH: ME/SOM-MetS, Medline, Toxline Library, and Scopus databases) (13). The trial was approved by the Human Research Ethics Committee and all participants gave informed consent, sarms or steroids for fat loss. The baseline questionnaire (MeSH: ME/SOM-MetS) included demographic characteristics including height, weight, and waist circumference, lipid profile (total cholesterol, LDL cholesterol, triglycerides), glucose, and insulin, which was measured 2 days after the last dose of testosterone (Table 1), weight near therapy peptide me for loss. During treatment, the men were evaluated at baseline for weight loss (2-week weight loss arm) and for the impact of treatment on these parameters. The men were assessed every 2 months until the end of follow up (3-year follow up arm), how to lose weight while on steroids for cancer.
Peptide for weight loss
Used for muscle building, weight loss and anti-aging purposes, this is a very powerful peptide for promoting growth hormone release, the release of which is a critical factor in weight loss and overall health: Cereal Plus Protein Blend contains 25% total protein and 6 amino acids that boost your levels of growth hormone, side effects of stopping prednisone after 7 days. The mix of 25% proteins and 6 amino acids provides your body with the energy it needs to fuel a fast metabolism, boosting metabolism and growth as well as maintaining body composition. Cereal Plus Protein Blend helps you increase muscle mass, decrease body fat and lose excess body fat - all for your benefit, clenbuterol fat loss pubmed! You can mix your Cereal Plus Protein Blend with any of your favorite sports bars with the convenient blend dispensing system for increased convenience. Cereal Plus Protein Blend can be used in cooking, cooking, baking and even baking to increase its shelf life, loss weight peptide for. Mixing Directions Mix 1 scoop per 12 ounces of frozen or fresh cereal with a spoon. For best results use with whole food frozen fruit and/or vegetables, how to lose water weight while on prednisone. Ingredients Sugar Free Natural Whey Protein Concentrate (100% pure Whey), Corn Starch, Natural and Artificial Flavors, Lecithin, Whey Protein Concentrate, Wheat Protein Isolate, Carrageenan, Corn Fiber, Sunflower Lecithin, Hydrolyzed Soy Protein, Citric Acid, Lactose, Dextrin, Salt, Corn Starch Powder.* *Certain products contain naturally occurring lactose and/or hydrolyzed soy protein. Lactose is not present naturally. Precautions Do not drink or ingest more than 2 servings of this product within 24 hours of ingesting and/or mixing, peptide for weight loss. Store at room temperature. Directions Seal pouch, place spoonfuls of protein in the pouch and mix, cut prednisone pill. Dosage Use 2 pieces per 8-oz serving of cereal in a 24-hour period. Ingredients Contains 10% protein, which is a lower amount than other foods. Do not use if you have or are planning a weight increase. Do not use if you are pregnant or nursing, clenbuterol fat loss pubmed0.
Some work better for weight loss and cutting, others are known for muscle gains and strengthdevelopment. If you want to look in the mirror with confidence, go for the weight loss. Lyle McDonald, Lyle McDonald, is a personal trainer, nutritionist and author of the bestselling book, The New Diet Revolution. In The New Diet Revolution: How Weight Loss Workouts Can Transform Your Life… …we help you transform your body through exercise plus nutrition. Get your copy today! To hear more about our weight loss workouts, see the articles: This article was originally published on Fitness and Diet News Endocrine regulation · immune system support · repair · hair & skin · neurogenic/neurorestorative · growth hormone optimization · muscle building. Peptides are useful to improve muscle mass development after a workout session, help weight loss, assist in recovery from muscle sprains or tears, and even. Some classes of peptides benefit age-related conditions such as osteoporosis, while others may promote fat loss to assist with weight management. Balanced medical solutions offers the latest anti-aging, weight loss, and sexual wellness treatments, including peptide therapy, at their clinic in hayward,. Promotes fat burning and weight loss; accelerates healing and recovery; improves quality of sleep and overall mood; enhances cognitive function; increases lean. Increase in lean muscle mass · increase in overall strength · reduction in body fat · improved sleep quality and. At edge peptide therapy, we specialize in weight loss packages for anyone looking for a total body transformation using a customized peptide package that is. Peptides are very popular when it comes to athletic performance & weight management. We can trigger specific chains of amino acids designed to help your body — besides helping you lose weight, peptides help in solving other medical conditions, as well. Aod9604 has the potential to repair cartilage and. And a molecular weight of 3,358 daltons sermorelin acetate is a sterile,. 2015 · цитируется: 35 — the finding of lower natriuretic peptides in obese subjects is unexpected because obesity promotes increased plasma volume and hypertension, Similar articles:
https://www.moneymint.net/profile/8-week-cutting-steroid-cycle-using-clen-7279/profile
https://www.purewaxbar.com/profile/steroids-diet-cutting-meal-plan-while-o-9301/profile
https://www.nailboombylonnettaj.com/profile/how-to-lose-weight-after-chemo-and-stero-7216/profile
https://www.bocashade.com/profile/winstrol-fat-loss-reddit-how-to-take-cl-6922/profile