Limitations of Warranty
JE Engineering as an organisation has existed since 1975. The current senior management have been closely involved with the company for nearly 30 years. Over the decades we have treated warranty issues with ‘common sense’ and worked with customers to find the best solutions we can, on the occasions when faults have developed in cars on which we have worked. In recent years there has been a trend towards an increasingly confrontational and uncooperative atmosphere when occasional problems occur with the cars, so it has become necessary to write this document to clarify the limits of warranty applicable to products and installations from JE Engineering Ltd.
Firstly, any modification made to the standard specification of a car is made because a customer wishes to achieve something different from that which they found to be possible with the standard car. Clearly if the performance of the car is changed, there may well be aspects of the performance of the car which alter in negative ways as well as positive ways, in the opinion of the vehicle user.
Secondly, it is also self-evident that JE Engineering is not an organisation which has the resources to thoroughly test conversions in all possible environments and with all the possible ‘driving styles’ of potential users, so any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Thirdly, although JE Engineering endeavours to ensure the suitability of its products when applied to otherwise standard vehicles, we cannot know whether our products are compatible with other alterations made to the vehicle either before or after the JE Engineering products are fitted. Again, any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Finally, JE Engineering Ltd. does not have a network of dealers around the world, so if we are to carry out any work under a warranty claim, in principle, this work can only be done in our workshop in Coventry, so whether the customer resides in Baginton, Warwickshire, or Manapouri, New Zealand, the problem and cost of returning the product to our workshop rests entirely with the customer.
Terms
JE Engineering will always attempt to be helpful and reasonable in seeking to resolve problems with vehicles, but if the situation is to be dealt with through legal representation, the following will apply as part of the contractual agreement.
1) Any claim for warranty must include the invoice number of the relevant original work carried out by JE Engineering Ltd., and its date.
2) The warranty claim can only be made by the original customer for the product as invoiced. No second owner or other entity is entitled to make any warranty claim.
3) The warranty is absolutely limited to the repair of defects of our materials or workmanship as solely determined by JE Engineering Ltd. No claims will be accepted for consequential losses of any sort, or associated losses of any sort.
4) For warranty work to be carried out, any vehicle or part must be returned to the Siskin Drive, Coventry, workshop of JE Engineering Ltd. in a condition as close as possible to the condition in which it originally left these premises.
5) Where a claim rests essentially in a matter of opinion on the altered performance of the vehicle, JE Engineering Ltd. will listen to this opinion and attempt to optimise the performance of the vehicle as far as possible, as solely determined by us, allowing for the state of the art within JE Engineering Ltd.
6) The warranty will cease to apply (and can never be re-applied) in any way, as soon as the vehicle is used for any extreme purpose. This includes competition use and testing in a competition environment, towing a trailer where the weight exceeds the rated weight for the standard vehicle, use of the vehicle when the loaded weight of the vehicle exceeds the rated weight for the standard vehicle, any type of arduous off-road use where the techniques of driving differ significantly from normal on-road use, use in any sort of extreme environment, and many other potentially challenging circumstances. If a customer is in doubt, JE Engineering Ltd. can offer advice, but it is up to the customer to decide about vehicle use, and it is solely up to JE Engineering Ltd. to determine whether any particular use is beyond the terms of the warranty.
7) Where a part must be replaced, JE Engineering Ltd. can use a new or a reconditioned part at its sole determination.
8) Where any work is carried out and/or parts are replaced under warranty, the newly implemented work and parts take on the remainder of the initial warranty period and mileage, and do not initiate any new warranty timing or mileage.
Implications of the above include :
-
a) We will not accept any liability for defects in parts supplied by the customer or by third parties, whether we fitted the parts or not.
-
b) Where a defect occurs it is the responsibility of the customer to minimise the effects of the defect and possibly suspend use of the vehicle until the defect can be repaired. If this is not done, and this results in a major failure, the warranty only covers the repair of the first defect. The major failure can be repaired by JE Engineering Ltd., at its discretion, but the cost of the repair will have to be met by the customer. For example, if an engine installation develops a water leak or an oil leak, a claim can be made to repair that leak, but if the vehicle continues in use to the point where a lack of water or oil causes a further failure of the engine, the repair of that failure will not be covered by warranty. Similarly, when using an automatic gearbox from JE Engineering Ltd. it may be that under some unique conditions of vehicle loading or towing, ambient temperature, altitude, gradient, road conditions, traffic, etc., that the operation of the gearbox becomes unreliable, e.g. the gearbox allows clutch slip or rather severe gear engagement. A warranty claim can be made to ask us to attempt to improve our calibration of the gearbox control to improve the performance in such conditions, but it cannot include any consequent failure of the gearbox. Consequently, it is always the responsibility of the driver of the vehicle to carefully assess the operation of the vehicle and if necessary, protect from damage by altering driving style, possibly using manual gear operation, and possibly stopping the journey to allow for cooling or other improvements in conditions, or taking other action, so as to prevent damage to the vehicle.
-
c) It is entirely the responsibility of the customer to determine whether the vehicle is suitable for any use to which it is put, considering the specification of the vehicle and any modifications which have been installed by JE Engineering Ltd., the customer, and any other party which has worked on the vehicle. We will attempt to advise, but we are not liable for the eventual performance of the vehicle in whatever unique combination of circumstances the customer instigates. Consequently, it is always the responsibility of the owner and user of the vehicle to carefully assess the operation of the vehicle to understand the effects and combinations of effects of the specifications of the vehicle and the modifications to it. It is advisable to test the vehicle carefully in less arduous conditions and on shorter journeys, initially, to allow the possibility of problems to be shown in more controllable circumstances, rather than trying out the maximum performance of the vehicle in challenging conditions immediately after the work is complete.
-
d) In any situation where a warranty claim is made, even if it is not eventually agreed, the cost of returning the vehicle or any parts to the Coventry premises is entirely the responsibility of the customer. The travelling, moving, or shipping costs are never part of the warranty claim.
-
e) Where it appears to be inconvenient to return the vehicle or parts to our Coventry premises for warranty work, it might be that we can arrange to either send a technician to the vehicle where it is, or to authorise another more convenient workshop to carry out repairs on the vehicle. This is not an obligation on us but might be offered as a helpful solution to a problem. In these circumstances, the travelling and subsistence costs of the visiting technician, and the shipping costs of any parts in either direction, must be met by the customer, and any replaced parts must be returned to us with shipping costs met by the customer. If another workshop is authorised to carry out work on the vehicle, we will only be liable for costs which we have specifically agreed with the workshop, charged at suitable business-to-business rates.
Limitations of Warranty
JE Engineering as an organisation has existed since 1975. The current senior management have been closely involved with the company for nearly 30 years. Over the decades we have treated warranty issues with ‘common sense’ and worked with customers to find the best solutions we can, on the occasions when faults have developed in cars on which we have worked. In recent years there has been a trend towards an increasingly confrontational and uncooperative atmosphere when occasional problems occur with the cars, so it has become necessary to write this document to clarify the limits of warranty applicable to products and installations from JE Engineering Ltd.
Firstly, any modification made to the standard specification of a car is made because a customer wishes to achieve something different from that which they found to be possible with the standard car. Clearly if the performance of the car is changed, there may well be aspects of the performance of the car which alter in negative ways as well as positive ways, in the opinion of the vehicle user.
Secondly, it is also self-evident that JE Engineering is not an organisation which has the resources to thoroughly test conversions in all possible environments and with all the possible ‘driving styles’ of potential users, so any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Thirdly, although JE Engineering endeavours to ensure the suitability of its products when applied to otherwise standard vehicles, we cannot know whether our products are compatible with other alterations made to the vehicle either before or after the JE Engineering products are fitted. Again, any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Finally, JE Engineering Ltd. does not have a network of dealers around the world, so if we are to carry out any work under a warranty claim, in principle, this work can only be done in our workshop in Coventry, so whether the customer resides in Baginton, Warwickshire, or Manapouri, New Zealand, the problem and cost of returning the product to our workshop rests entirely with the customer.
Terms
JE Engineering will always attempt to be helpful and reasonable in seeking to resolve problems with vehicles, but if the situation is to be dealt with through legal representation, the following will apply as part of the contractual agreement.
1) Any claim for warranty must include the invoice number of the relevant original work carried out by JE Engineering Ltd., and its date.
2) The warranty claim can only be made by the original customer for the product as invoiced. No second owner or other entity is entitled to make any warranty claim.
3) The warranty is absolutely limited to the repair of defects of our materials or workmanship as solely determined by JE Engineering Ltd. No claims will be accepted for consequential losses of any sort, or associated losses of any sort.
4) For warranty work to be carried out, any vehicle or part must be returned to the Siskin Drive, Coventry, workshop of JE Engineering Ltd. in a condition as close as possible to the condition in which it originally left these premises.
5) Where a claim rests essentially in a matter of opinion on the altered performance of the vehicle, JE Engineering Ltd. will listen to this opinion and attempt to optimise the performance of the vehicle as far as possible, as solely determined by us, allowing for the state of the art within JE Engineering Ltd.
6) The warranty will cease to apply (and can never be re-applied) in any way, as soon as the vehicle is used for any extreme purpose. This includes competition use and testing in a competition environment, towing a trailer where the weight exceeds the rated weight for the standard vehicle, use of the vehicle when the loaded weight of the vehicle exceeds the rated weight for the standard vehicle, any type of arduous off-road use where the techniques of driving differ significantly from normal on-road use, use in any sort of extreme environment, and many other potentially challenging circumstances. If a customer is in doubt, JE Engineering Ltd. can offer advice, but it is up to the customer to decide about vehicle use, and it is solely up to JE Engineering Ltd. to determine whether any particular use is beyond the terms of the warranty.
7) Where a part must be replaced, JE Engineering Ltd. can use a new or a reconditioned part at its sole determination.
8) Where any work is carried out and/or parts are replaced under warranty, the newly implemented work and parts take on the remainder of the initial warranty period and mileage, and do not initiate any new warranty timing or mileage.
Implications of the above include :
-
a) We will not accept any liability for defects in parts supplied by the customer or by third parties, whether we fitted the parts or not.
-
b) Where a defect occurs it is the responsibility of the customer to minimise the effects of the defect and possibly suspend use of the vehicle until the defect can be repaired. If this is not done, and this results in a major failure, the warranty only covers the repair of the first defect. The major failure can be repaired by JE Engineering Ltd., at its discretion, but the cost of the repair will have to be met by the customer. For example, if an engine installation develops a water leak or an oil leak, a claim can be made to repair that leak, but if the vehicle continues in use to the point where a lack of water or oil causes a further failure of the engine, the repair of that failure will not be covered by warranty. Similarly, when using an automatic gearbox from JE Engineering Ltd. it may be that under some unique conditions of vehicle loading or towing, ambient temperature, altitude, gradient, road conditions, traffic, etc., that the operation of the gearbox becomes unreliable, e.g. the gearbox allows clutch slip or rather severe gear engagement. A warranty claim can be made to ask us to attempt to improve our calibration of the gearbox control to improve the performance in such conditions, but it cannot include any consequent failure of the gearbox. Consequently, it is always the responsibility of the driver of the vehicle to carefully assess the operation of the vehicle and if necessary, protect from damage by altering driving style, possibly using manual gear operation, and possibly stopping the journey to allow for cooling or other improvements in conditions, or taking other action, so as to prevent damage to the vehicle.
-
c) It is entirely the responsibility of the customer to determine whether the vehicle is suitable for any use to which it is put, considering the specification of the vehicle and any modifications which have been installed by JE Engineering Ltd., the customer, and any other party which has worked on the vehicle. We will attempt to advise, but we are not liable for the eventual performance of the vehicle in whatever unique combination of circumstances the customer instigates. Consequently, it is always the responsibility of the owner and user of the vehicle to carefully assess the operation of the vehicle to understand the effects and combinations of effects of the specifications of the vehicle and the modifications to it. It is advisable to test the vehicle carefully in less arduous conditions and on shorter journeys, initially, to allow the possibility of problems to be shown in more controllable circumstances, rather than trying out the maximum performance of the vehicle in challenging conditions immediately after the work is complete.
-
d) In any situation where a warranty claim is made, even if it is not eventually agreed, the cost of returning the vehicle or any parts to the Coventry premises is entirely the responsibility of the customer. The travelling, moving, or shipping costs are never part of the warranty claim.
-
e) Where it appears to be inconvenient to return the vehicle or parts to our Coventry premises for warranty work, it might be that we can arrange to either send a technician to the vehicle where it is, or to authorise another more convenient workshop to carry out repairs on the vehicle. This is not an obligation on us but might be offered as a helpful solution to a problem. In these circumstances, the travelling and subsistence costs of the visiting technician, and the shipping costs of any parts in either direction, must be met by the customer, and any replaced parts must be returned to us with shipping costs met by the customer. If another workshop is authorised to carry out work on the vehicle, we will only be liable for costs which we have specifically agreed with the workshop, charged at suitable business-to-business rates.
02476 305 018
Profile
About
Best anabolic steroids stack, plant growth steroids
Best anabolic steroids stack, plant growth steroids - Buy anabolic steroids online
Best anabolic steroids stack
Testosterone Enanthate cycle may be the champion in the steroid cycle but they are still dangerous. This is the steroid cycle that is the most dangerous and the most expensive. For that reason I advise against using them, best anabolic steroids to get ripped. I have had so many incidents I'm starting to see a trend here and I think that it has a lot to do with the fact that the steroid cycle is much more complicated than the one for testosterone. Here are the symptoms: Stress, sleeplessness, irritability, depression Estradiol levels are very low, best anabolic steroids on the market. Testosterone levels are about double or triple, in the 30-50% range Blood is cloudy (white) Weight loss Dizziness, headache Increased hair loss Unexplained hair loss Extreme weakness, fatigue, and lack of energy Sleeping problems Increased appetite Diarrhea Fatigue. In essence, your blood appears to be full of steroids…or maybe not, best anabolic steroids without side effects. If your testosterone is normal and the stress, sleeplessness, irritability, depression and exhaustion are due to an imbalance in your T, I'd say it may be something you need to go on, for the safety and health of yourself and others. When looking at the cycle, it's important to note that a number of steroid hormones are in the cycle at once, best anabolic steroids on the market. Some are metabolized at the same time which is why they can have different effects. One of the important factors is the amount a hormone can interact with the rest of the cycle. For example, a hormone can decrease your blood flow and cause sleepiness and a feeling of exhaustion so an increased T will be more likely to contribute to the fatigue and sleepiness, best anabolic steroids to buy. The cycle I want to look at today is one for testosterone. Let's take one example: Testosterone Enanthate is the steroids that have been the subject of so much hype over the years and the steroids used by the military. The cycle that begins on anabolic steroids is called the Testosterone Enanthate cycle, testosterone enanthate cycle steroid. However, this isn't the cycle you want to go for if it involves being out of commission for more than a month at a time due to physical pain or some other related health issue. This is probably the worst cycling regime for most testosterone addicts so I always recommend switching to a lower dose of one of the other steroids. The cycle that begins with anabolic steroids is known as the Testosterone Enanthate cycle, best anabolic steroids to get ripped2.
Plant growth steroids
Livestock often receive steroids to enhance muscle growth and provide more, better quality meat, and animals may also take Steroids to treat health conditionssuch as an enlarged heart or high cholesterol. For more information about the use of steroids, see the following resources: What Are Exposures, best anabolic steroids in india? When should I call my veterinarian, best anabolic steroids to use? Exposure to veterinary medications, including anti-coagulant drugs, is always advisable when handling animals that are under or near the supervision of a veterinarian or when dealing with animal populations that may be under or near the supervision of a veterinarian. To help you keep track of exposures, the U, best anabolic steroids in india.S, best anabolic steroids in india. Dept. of Agriculture (USDA) makes the following listings on its website: USDA is the only organization authorized by the U.S. Congress to administer a National List of Exposures. What should I do if my pets are exposed to veterinary medications? This advice applies only to exposures to medications administered to animals under or near the supervision of a veterinarian, plant growth steroids. You should report any exposure to your veterinarian, plant growth steroids. It is important to do this as soon after the exposure as possible, and immediately begin the normal treatment plans, best anabolic steroids pills. Be sure the medications have been reported and that the label provides more detailed information about the risk, such as the date of administration. If you have questions about animal exposure, discuss them with your veterinarian, best anabolic steroids on the market. Who Can I Contact, best anabolic steroids on amazon?
If you have serious worsening of asthma symptoms (an asthma attack), your doctor may prescribe a brief course of oral steroids such as prednisone, which can be used for 3 to 10 days. In some cases, steroids may not have additional benefits. If you are not sure whether your treatment will help your condition, discuss it with your doctor. Surgical Treatment For a significant amount of time after you have your child's surgery, you will be unable to take other prescription medications such as steroids. If you would like to begin using steroids before the time of surgery, discuss it with your doctor. If you decide against the use of steroids, you may do best after the procedure with these methods: Apply a topical steroid cream such as Restylane to your child's face and neck, followed by an oral steroid drug to your child's chest (lithotactic medicine). Take oral steroids to your child's chest by using a breathing tube for an hour. This may relieve the pain temporarily and give you time to get to a doctor. Before your child goes straight into the operating room, ask him or her if he or she feels well enough to go straight in. If your child is under 12 years old if you are over 60, you may want to check with your doctor for specific warnings about steroid medications. If you are not sure whether the medication will treat your child, consult your pediatrician. In some cases, you may even be able to take steroids on the road to recovery. Contact your doctor about finding treatment that works best for you. Medications that Affect Bone The bone can be injured during any surgery. There are a number of medications that can be taken to prevent further fractures. However, the most important medications to follow are: Antidepressants (including methylphenidate, and tricyclic antidepressants) Anti-inflammatory medications The following medications are not as important for bone repair. Because of a possible decrease in bone density, these medications may be less appropriate for use after surgery: SN — crazybulk recommends trenorol instead of the well-known anabolic trenbolone (or tren), providing amazing muscle strengthening and dynamic. Clenbutrol is a well known speedy fats burning weight loss supplements that work fast much like clenbuterol. — by taking popular supplements like d-bal, hgh-x2, and trenorol, you can purportedly enjoy similar effects to anabolic steroids like dianabol. — best anabolic steroid for mass gain. Back in the 70s, using anabolic steroids was the best way to get that edge. All the really big guys you saw. Baillieres best pract res clin endocrinol metab. Foro desafio hosting - perfil del usuario > perfil página. Usuario: oral anabolic steroids for cutting, best steroids for cutting and lean muscle, 2002 · цитируется: 173 — brassinosteroids are a new class of plant hormones with a polyoxygenated steroid structure showing pronounced plant growth regulatory activity. Gibberellin has 4 isperene units and is similar to a steroid in. Journal of plant growth regulation 2017, 36 (4) , 1002-1030. Steroids group is focused to synthesis and study of biological and immunological activities of brassinosteroids, plant and animal steroids and related. — they are anabolic, but not wildly so. In general, this class of compounds facilitates a middle ground level of muscle growth, neurological. Bacillus amyloliquefaciens is a plant growth promoting bacterium (pgpb) ENDSN Related Article:
https://www.benjithomas.com/profile/caridemonbreun1981/profile
https://www.nadiyashahsuperstars.com/profile/austinorey1995/profile
https://www.phioy.com/profile/katricecoonfield1970/profile
https://www.mariafortunata.com/profile/armandobrayman1978/profile