Limitations of Warranty
JE Engineering as an organisation has existed since 1975. The current senior management have been closely involved with the company for nearly 30 years. Over the decades we have treated warranty issues with ‘common sense’ and worked with customers to find the best solutions we can, on the occasions when faults have developed in cars on which we have worked. In recent years there has been a trend towards an increasingly confrontational and uncooperative atmosphere when occasional problems occur with the cars, so it has become necessary to write this document to clarify the limits of warranty applicable to products and installations from JE Engineering Ltd.
Firstly, any modification made to the standard specification of a car is made because a customer wishes to achieve something different from that which they found to be possible with the standard car. Clearly if the performance of the car is changed, there may well be aspects of the performance of the car which alter in negative ways as well as positive ways, in the opinion of the vehicle user.
Secondly, it is also self-evident that JE Engineering is not an organisation which has the resources to thoroughly test conversions in all possible environments and with all the possible ‘driving styles’ of potential users, so any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Thirdly, although JE Engineering endeavours to ensure the suitability of its products when applied to otherwise standard vehicles, we cannot know whether our products are compatible with other alterations made to the vehicle either before or after the JE Engineering products are fitted. Again, any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Finally, JE Engineering Ltd. does not have a network of dealers around the world, so if we are to carry out any work under a warranty claim, in principle, this work can only be done in our workshop in Coventry, so whether the customer resides in Baginton, Warwickshire, or Manapouri, New Zealand, the problem and cost of returning the product to our workshop rests entirely with the customer.
Terms
JE Engineering will always attempt to be helpful and reasonable in seeking to resolve problems with vehicles, but if the situation is to be dealt with through legal representation, the following will apply as part of the contractual agreement.
1) Any claim for warranty must include the invoice number of the relevant original work carried out by JE Engineering Ltd., and its date.
2) The warranty claim can only be made by the original customer for the product as invoiced. No second owner or other entity is entitled to make any warranty claim.
3) The warranty is absolutely limited to the repair of defects of our materials or workmanship as solely determined by JE Engineering Ltd. No claims will be accepted for consequential losses of any sort, or associated losses of any sort.
4) For warranty work to be carried out, any vehicle or part must be returned to the Siskin Drive, Coventry, workshop of JE Engineering Ltd. in a condition as close as possible to the condition in which it originally left these premises.
5) Where a claim rests essentially in a matter of opinion on the altered performance of the vehicle, JE Engineering Ltd. will listen to this opinion and attempt to optimise the performance of the vehicle as far as possible, as solely determined by us, allowing for the state of the art within JE Engineering Ltd.
6) The warranty will cease to apply (and can never be re-applied) in any way, as soon as the vehicle is used for any extreme purpose. This includes competition use and testing in a competition environment, towing a trailer where the weight exceeds the rated weight for the standard vehicle, use of the vehicle when the loaded weight of the vehicle exceeds the rated weight for the standard vehicle, any type of arduous off-road use where the techniques of driving differ significantly from normal on-road use, use in any sort of extreme environment, and many other potentially challenging circumstances. If a customer is in doubt, JE Engineering Ltd. can offer advice, but it is up to the customer to decide about vehicle use, and it is solely up to JE Engineering Ltd. to determine whether any particular use is beyond the terms of the warranty.
7) Where a part must be replaced, JE Engineering Ltd. can use a new or a reconditioned part at its sole determination.
8) Where any work is carried out and/or parts are replaced under warranty, the newly implemented work and parts take on the remainder of the initial warranty period and mileage, and do not initiate any new warranty timing or mileage.
Implications of the above include :
-
a) We will not accept any liability for defects in parts supplied by the customer or by third parties, whether we fitted the parts or not.
-
b) Where a defect occurs it is the responsibility of the customer to minimise the effects of the defect and possibly suspend use of the vehicle until the defect can be repaired. If this is not done, and this results in a major failure, the warranty only covers the repair of the first defect. The major failure can be repaired by JE Engineering Ltd., at its discretion, but the cost of the repair will have to be met by the customer. For example, if an engine installation develops a water leak or an oil leak, a claim can be made to repair that leak, but if the vehicle continues in use to the point where a lack of water or oil causes a further failure of the engine, the repair of that failure will not be covered by warranty. Similarly, when using an automatic gearbox from JE Engineering Ltd. it may be that under some unique conditions of vehicle loading or towing, ambient temperature, altitude, gradient, road conditions, traffic, etc., that the operation of the gearbox becomes unreliable, e.g. the gearbox allows clutch slip or rather severe gear engagement. A warranty claim can be made to ask us to attempt to improve our calibration of the gearbox control to improve the performance in such conditions, but it cannot include any consequent failure of the gearbox. Consequently, it is always the responsibility of the driver of the vehicle to carefully assess the operation of the vehicle and if necessary, protect from damage by altering driving style, possibly using manual gear operation, and possibly stopping the journey to allow for cooling or other improvements in conditions, or taking other action, so as to prevent damage to the vehicle.
-
c) It is entirely the responsibility of the customer to determine whether the vehicle is suitable for any use to which it is put, considering the specification of the vehicle and any modifications which have been installed by JE Engineering Ltd., the customer, and any other party which has worked on the vehicle. We will attempt to advise, but we are not liable for the eventual performance of the vehicle in whatever unique combination of circumstances the customer instigates. Consequently, it is always the responsibility of the owner and user of the vehicle to carefully assess the operation of the vehicle to understand the effects and combinations of effects of the specifications of the vehicle and the modifications to it. It is advisable to test the vehicle carefully in less arduous conditions and on shorter journeys, initially, to allow the possibility of problems to be shown in more controllable circumstances, rather than trying out the maximum performance of the vehicle in challenging conditions immediately after the work is complete.
-
d) In any situation where a warranty claim is made, even if it is not eventually agreed, the cost of returning the vehicle or any parts to the Coventry premises is entirely the responsibility of the customer. The travelling, moving, or shipping costs are never part of the warranty claim.
-
e) Where it appears to be inconvenient to return the vehicle or parts to our Coventry premises for warranty work, it might be that we can arrange to either send a technician to the vehicle where it is, or to authorise another more convenient workshop to carry out repairs on the vehicle. This is not an obligation on us but might be offered as a helpful solution to a problem. In these circumstances, the travelling and subsistence costs of the visiting technician, and the shipping costs of any parts in either direction, must be met by the customer, and any replaced parts must be returned to us with shipping costs met by the customer. If another workshop is authorised to carry out work on the vehicle, we will only be liable for costs which we have specifically agreed with the workshop, charged at suitable business-to-business rates.
Limitations of Warranty
JE Engineering as an organisation has existed since 1975. The current senior management have been closely involved with the company for nearly 30 years. Over the decades we have treated warranty issues with ‘common sense’ and worked with customers to find the best solutions we can, on the occasions when faults have developed in cars on which we have worked. In recent years there has been a trend towards an increasingly confrontational and uncooperative atmosphere when occasional problems occur with the cars, so it has become necessary to write this document to clarify the limits of warranty applicable to products and installations from JE Engineering Ltd.
Firstly, any modification made to the standard specification of a car is made because a customer wishes to achieve something different from that which they found to be possible with the standard car. Clearly if the performance of the car is changed, there may well be aspects of the performance of the car which alter in negative ways as well as positive ways, in the opinion of the vehicle user.
Secondly, it is also self-evident that JE Engineering is not an organisation which has the resources to thoroughly test conversions in all possible environments and with all the possible ‘driving styles’ of potential users, so any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Thirdly, although JE Engineering endeavours to ensure the suitability of its products when applied to otherwise standard vehicles, we cannot know whether our products are compatible with other alterations made to the vehicle either before or after the JE Engineering products are fitted. Again, any use of the vehicle should be approached with care and due attention to the development of possible problems, so that they can be addressed before serious damage occurs.
Finally, JE Engineering Ltd. does not have a network of dealers around the world, so if we are to carry out any work under a warranty claim, in principle, this work can only be done in our workshop in Coventry, so whether the customer resides in Baginton, Warwickshire, or Manapouri, New Zealand, the problem and cost of returning the product to our workshop rests entirely with the customer.
Terms
JE Engineering will always attempt to be helpful and reasonable in seeking to resolve problems with vehicles, but if the situation is to be dealt with through legal representation, the following will apply as part of the contractual agreement.
1) Any claim for warranty must include the invoice number of the relevant original work carried out by JE Engineering Ltd., and its date.
2) The warranty claim can only be made by the original customer for the product as invoiced. No second owner or other entity is entitled to make any warranty claim.
3) The warranty is absolutely limited to the repair of defects of our materials or workmanship as solely determined by JE Engineering Ltd. No claims will be accepted for consequential losses of any sort, or associated losses of any sort.
4) For warranty work to be carried out, any vehicle or part must be returned to the Siskin Drive, Coventry, workshop of JE Engineering Ltd. in a condition as close as possible to the condition in which it originally left these premises.
5) Where a claim rests essentially in a matter of opinion on the altered performance of the vehicle, JE Engineering Ltd. will listen to this opinion and attempt to optimise the performance of the vehicle as far as possible, as solely determined by us, allowing for the state of the art within JE Engineering Ltd.
6) The warranty will cease to apply (and can never be re-applied) in any way, as soon as the vehicle is used for any extreme purpose. This includes competition use and testing in a competition environment, towing a trailer where the weight exceeds the rated weight for the standard vehicle, use of the vehicle when the loaded weight of the vehicle exceeds the rated weight for the standard vehicle, any type of arduous off-road use where the techniques of driving differ significantly from normal on-road use, use in any sort of extreme environment, and many other potentially challenging circumstances. If a customer is in doubt, JE Engineering Ltd. can offer advice, but it is up to the customer to decide about vehicle use, and it is solely up to JE Engineering Ltd. to determine whether any particular use is beyond the terms of the warranty.
7) Where a part must be replaced, JE Engineering Ltd. can use a new or a reconditioned part at its sole determination.
8) Where any work is carried out and/or parts are replaced under warranty, the newly implemented work and parts take on the remainder of the initial warranty period and mileage, and do not initiate any new warranty timing or mileage.
Implications of the above include :
-
a) We will not accept any liability for defects in parts supplied by the customer or by third parties, whether we fitted the parts or not.
-
b) Where a defect occurs it is the responsibility of the customer to minimise the effects of the defect and possibly suspend use of the vehicle until the defect can be repaired. If this is not done, and this results in a major failure, the warranty only covers the repair of the first defect. The major failure can be repaired by JE Engineering Ltd., at its discretion, but the cost of the repair will have to be met by the customer. For example, if an engine installation develops a water leak or an oil leak, a claim can be made to repair that leak, but if the vehicle continues in use to the point where a lack of water or oil causes a further failure of the engine, the repair of that failure will not be covered by warranty. Similarly, when using an automatic gearbox from JE Engineering Ltd. it may be that under some unique conditions of vehicle loading or towing, ambient temperature, altitude, gradient, road conditions, traffic, etc., that the operation of the gearbox becomes unreliable, e.g. the gearbox allows clutch slip or rather severe gear engagement. A warranty claim can be made to ask us to attempt to improve our calibration of the gearbox control to improve the performance in such conditions, but it cannot include any consequent failure of the gearbox. Consequently, it is always the responsibility of the driver of the vehicle to carefully assess the operation of the vehicle and if necessary, protect from damage by altering driving style, possibly using manual gear operation, and possibly stopping the journey to allow for cooling or other improvements in conditions, or taking other action, so as to prevent damage to the vehicle.
-
c) It is entirely the responsibility of the customer to determine whether the vehicle is suitable for any use to which it is put, considering the specification of the vehicle and any modifications which have been installed by JE Engineering Ltd., the customer, and any other party which has worked on the vehicle. We will attempt to advise, but we are not liable for the eventual performance of the vehicle in whatever unique combination of circumstances the customer instigates. Consequently, it is always the responsibility of the owner and user of the vehicle to carefully assess the operation of the vehicle to understand the effects and combinations of effects of the specifications of the vehicle and the modifications to it. It is advisable to test the vehicle carefully in less arduous conditions and on shorter journeys, initially, to allow the possibility of problems to be shown in more controllable circumstances, rather than trying out the maximum performance of the vehicle in challenging conditions immediately after the work is complete.
-
d) In any situation where a warranty claim is made, even if it is not eventually agreed, the cost of returning the vehicle or any parts to the Coventry premises is entirely the responsibility of the customer. The travelling, moving, or shipping costs are never part of the warranty claim.
-
e) Where it appears to be inconvenient to return the vehicle or parts to our Coventry premises for warranty work, it might be that we can arrange to either send a technician to the vehicle where it is, or to authorise another more convenient workshop to carry out repairs on the vehicle. This is not an obligation on us but might be offered as a helpful solution to a problem. In these circumstances, the travelling and subsistence costs of the visiting technician, and the shipping costs of any parts in either direction, must be met by the customer, and any replaced parts must be returned to us with shipping costs met by the customer. If another workshop is authorised to carry out work on the vehicle, we will only be liable for costs which we have specifically agreed with the workshop, charged at suitable business-to-business rates.
02476 305 018
Profile
About
Do peptides work for weight loss, lightweight peptide for weight loss
Do peptides work for weight loss, lightweight peptide for weight loss - Buy anabolic steroids online
Do peptides work for weight loss
Benefits of weight loss steroids for females there is a secret behind anabolic steroids for fat loss, they work best when there is extra fat storage in your body. Many people don't realize that a lot of weight loss steroids are more effective when used in combination with other medications (like, insulin), side effects of clenbuterol for weight loss. Here's a little about insulin and weight loss: Insulin – Your body uses insulin to help regulate body fat levels: It's your body's own internal mechanism to get food to your cells and keep them functioning normally. We need to produce insulin. It's used to make sure that the cells can process food and take it in, do peptides for loss weight work. Your body also uses insulin to make hormones which regulate your blood sugar, do peptides work for weight loss. When our body is in deficit, it's not enough insulin to get the glucose out of blood into your cells. It turns glucose into fat, best clenbuterol cycle for weight loss. If you have too much or too little insulin on your body, it will take the glucose from your blood into your muscle cells to help them work harder. If your blood glucose is too high, it causes your muscle to swell and become weaker. It will make you fat, peptides for cutting reddit. Insulin also helps your body to store fat. One way to accomplish this is by allowing your body to store fat and make it available for storage when needed. Most people do not make enough insulin for this purpose, does clomid cause weight gain or loss. A deficiency of insulin will make your body fat due to insulin being a large component of fat-burning hormones (like leptin or ghrelin). As a result, your body will produce a lot of extra ghrelin, which will keep you in a state of "hunger" and will keep you from eating and burning a lot of energy, peptides for fat burning. To be fat-free: It's extremely important to keep weight from getting to a certain place, weight loss on clomid. That's why dieting and cutting out any food (especially carbohydrates) is something that you must stay on top of. Too many carbs can stop you from burning calories, too few carbs can get you into a starvation state and make you fat, and too much or too little carbs will lead to a lot of insulin being released and your body turning fat to fat. It's important to focus on getting fat and building lean muscle, is peptide good for weight loss. Remember that weight loss steroids work best when there is extra fat storage in your body, ostarine sarm for weight loss0. So if you're trying to lose weight and have too little muscle or too much fat storage, these drugs are not going to make you fat, they are just going to make you hungrier and make you more aggressive in your efforts. Your diet should have lots of meat, fish, eggs, and vegetables and you should be trying to lose weight, ostarine sarm for weight loss1.
Lightweight peptide for weight loss
Used for muscle building, weight loss and anti-aging purposes, this is a very powerful peptide for promoting growth hormone releasefrom the muscle - making it a great protein for body builders, powerlifters and bodybuilders. 5, weight loss peptide cycle. Creatine Monohydrate (CM) Creatine (which means creatine phosphate) is a natural component of animal tissues. It is not found in the diet, and only in small amounts in food such as meat, fish and eggs, weight loss and peptides. However, we find it readily available from supplement stores, and in many types of foods. Its effectiveness, especially for increasing strength and size, is a matter of debate. Many scientists are of the opinion that it is unlikely that it will increase strength by any great amount. However, a recent study suggested a possible link between creatine use and increased lean body mass during exercise, weight lightweight peptide loss for. The authors concluded that "If this is the case, dietary creatine could be used to improve performance or prevent type II diabetes." So there you have it! - a protein shake which is great source of protein at reasonable prices. The amino acid, lysine, which is responsible for an increase in the body's rate of energy expenditure, has a particularly strong effect on the muscles - so this protein shake may just be a godsend if you're a powerlifter trying to improve your bench press, research peptides for weight loss. If you're interested in more about the protein source for your protein shakes, check out the article above. 6, peptides for fat burning. Choline Choline (aka choline chloride) has been found to improve mental performance in people with autism spectrum disorder. As the name suggests, 'choline' is derived from the Greek 'chloride' and means 'to fill', best peptides for cutting cycle. It is essential for normal brain development and function. In fact, there are four different forms of this essential trace mineral: Choline: Essential for the central nervous system Choline: Essential to the brain choline: Essential to the retina choline: Essential to the eye system The best source of choline is fortified foods, where a combination of 2 - 3 g of choline is used throughout the day. But the good news is that this powder does not contain any of the harmful 'essential fatty acids', lightweight peptide for weight loss. For the best results, try combining the choline powder with other ingredients such as: L-Ascorbyl-2-Polyphosphate L-Eicosapentaenoic Acid (17:0) Choline Hydrochloride (2.0mg)
These steroids can help you to lose fat, increase defined lean muscle mass, all while increasing your energy levels. This is a huge benefit to fitness and health. For the best results, you should mix up your diet with this drug. 1. DHEA. This drug can help you gain the lean muscle mass you need to become an athlete. It helps you create lean tissue by speeding up muscle repair and increasing the rate at which protein is broken down as it is used up. It also gives you increased energy which will allow you to put in more intense work in the gym. DHEA is a natural appetite suppressant. That means it will reduce your appetite for food and prevent you from overeating. If you start using this drug, it will help you lose weight. It can also boost a person's blood levels of testosterone. DHEA is the most expensive and is classified as an aphrodisiac and an anabolic steroid. 2. Testosterone Booster. Testosterone Booster is a great muscle building drug. It increases the level of a steroid hormone which can give you lean muscle mass. When you first start on this drug, it will give you the muscle growth needed to become an athlete, but after a while, your body needs to develop these extra muscles. As well, it will help you in losing fat. This helps you to burn fat and help you have a healthy metabolism. It takes 30 days to take one dose of Test Booster for best results. If you take Test Booster, there are side effects like acne on the skin as well as hair loss. 3. Testosterone Injectable. Testosterone is a hormone that plays a crucial role in building lean muscle mass. It helps you put on more muscle mass by increasing muscle protein production and reducing body fat. You can get Testosterone Injectable by a healthcare professional who uses blood tests to give you what is called a Prostate Specific Antigen test, also known as a PSA test, to tell if you have prostate cancer. The test is done to determine your rate of increase of prostate cancer as well as your ability of developing the disease. If you are diagnosed with prostate cancer, a blood test is done at around 40 to 50 days after you are diagnosed. It is important to take Prostate Specific Antigen test at different times in order to increase your chances of getting healthy and prevent further damage. 4. Testosterone Enanthate. Testosterone enanthate is a synthetic form of testosterone. It works by stimulating natural testosterone production and has the added capacity to help increase muscle growth, reduce body fat, and Related Article:
https://www.beautyblog.shop/profile/charolettewider1994/profile
https://www.markochulev.com/profile/lose-weight-with-collagen-peptides-weig-8352/profile
https://www.therapiemelodielutton.com/profile/dantehaessler1983/profile
https://www.hectorpsicologia.com/profile/adelinemclilly1997/profile